Available Electronic Items are listed below.
Archive information on the Dutchtronix AVR Oscilloscope Clock Hardware 3-1, Enhanced version kit. These kits are no longer available. A replacement clock based on the same design is available from Sparkfun Electronics.
V3.1 hardware Oscilloscope Clock Enhanced kit, equipped with the new Atmega328p AVR. Look at the Dutchtronix web site for details and please understand that this clock works best with an ANALOG oscilloscope. Only High-End Digital oscilloscopes like the Tektronix TDS2014B can produce an image. This clock has firmware V3.5a. The highlights are:
 |
Multiple applications preloaded: Clock, Terminal, Function Generator. |
|
Set and Display Time and Date using 2 on-board button switches, incl. auto-repeat. |
|
Set the Baud Rate using the on-screen Menu |
|
Roman Numerals Clock Display Option |
|
Binary Clock Display option, together with Hexadecimal numeric Display (Bi-Hex clock) |
|
Fractional Seconds display option showing time in 1/100 of a second increments. |
|
A total of 30 different Clock Display combinations is possible. |
|
Optionally add your own name to the Clock Display |
|
Automatic Time and Date setting when connected to the NMEA output from a GPS device |
|
Automatic Daylight Saving Time correction for the years 2008-2014 for the USA and the EU |
Other features of the Dutchtronix AVR Oscilloscope clock:
|
Connects to your analog scope in X-Y mode using BNC cables or probes (1x, 10x). |
|
Uses the brand new Atmega328p AVR. |
|
Kit includes 2 standard BNC connectors |
|
150-250 Hz refresh rate (dependent on the selected clock face mode) |
|
Set clock options and modes with On Screen Menu using the button switch |
|
Header for External Clock Signal (1 Pulse Per Second, edge triggered) |
|
Automatic Screen Repositioning to prevent screen burn-in |
|
Display Calibration mode |
|
Intensity Control Output |
|
Professionally made dual sided PCB (with solder masks and silkscreen) |
|
On-board +5V regulator. Use your own wall adapter (8-15V, center positive) |
|
Extensive FAQ document |
|
On-board Real-Time Clock IC with 32.768kHz crystal and battery backup: this clock won't lose time! |
|
RS-232 serial control connection with standard DB-9 connector (use is optional) |
|
Firmware upgradeable through the RS-232 interface using built-in boot loader |
This Dutchtronix AVR Oscilloscope Clock is no longer available from South Holland Trading.
